Instrumentation
PTM
Pressure and temperature sensor
Overview
Nominal size DN::
25
25
Material sealing element (in contact with medium):
EPDM | FPM
EPDM | FPM
Connection:
Socket | Spigot
Socket | Spigot
- compact pressure and temperature sensor PTM
- Ideal as a dry run protection device for pumps and for process monitoring
- Pressure range from 0.5 up to 10 bar
- alternative signal output interfaces (current loop/relay/Modbus RTU)
- Compact version for space-saving installation
- Flex version for difficult-to-reach or heavily contaminated locations
Accessories
PTM Pressure gauge connection adapter
- The new PTM pressure gauge adapter allows the connection of a programmable pressure and temperature sensor (PTM) to our proven diaphragm seal (MDM902). For further technical information, please refer to our data sheet.
PSU_Netzteil
- For supplying operating voltage to one or several sensors
- Protected against short-circuiting, overload and excess temperature
- Low stand-by power consumption
- Housing with spray water protection
- Wall installation
- optional with WIFI module for MD sensors (Modbus RTU-TCP WIFI MD-Gateway)
Related Products
VCX
- Vertical centrifugal chemical pump made of plastic
- STÜBBE X-CLASS: Heavy Duty modell of the STÜBBE pump range
- Non self-priming, vertical, single-stage submersible plastic pump without any bearings in the wet area (Cantilever design)
- Gap clearance is variably adjustable
- Vertical discharge nozzle integrated in the pump housing
- efficient hydraulics due to up-to-date calculation programs
- Extreme resistance
NX
- X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps
- Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It can withstand anything.
- Plastic standard pump for chemicals
- Extreme resistance
- Maximum safety
- Long-lived and sturdy
- Significantly improved service life
SHB
- Horizontal single-stage spiral cased pump
- Shaft sealing through single or double acting mechanical seal
- Circulation, rinsing, quench or barrier medium depending on application
- Made of sturdy plastic components, ensuring excellent operating reliability even under extreme operating conditions
- Broad range of applications through diverse construction and material combinations
- Closed impeller
- Impeller fastening independent of rotational direction with fluid-proof encapsulation
- Stainless steel screws (1.4301)
- Corrosion protection through 2-component protective paint
BE
- STÜBBE E-CLASS: entry-level model in the STÜBBE pump family
- horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming)
- efficient hydraulics due to up-to-date calculation programs
- best possible price/performance ratio for elementary pumping tasks
- self-developed, innovative mechanical seal module kit (static pressure up to 6 bar)
- replaceable pump casing parts are made of solid plastic
- easy disassembly and assembly
- reduction of parts due to modular system
- solids load up to max. 5%
- viscosity up to max. 100 mm2/s
- operating temperature: PP up to max. 80 °C / PVDF up to max. 100 °C
SHM
- Magnetically coupled pump with a wide range of performance up to 7.5 kW
- hermetically sealed hydraulic part
- reliable coupling by strong magnet systems
- compact design
- PVDF-Versions for demanding applications
- good availability due to modular design
UNI DISPLAY
- standardized platform for different pressure-temperature and fill levelsensor
- SD-Card slot for process (Datalogger) for firmware updates
- devices of the series PTM, HFT, HFB or UFM are mountable
- incl. SD-card and transparent cover
- illuminate display
- parameter copy function
- protection of your pump
- Alarm signal before pump failure